Weights
-
Stainless Steel 2 inch Serrated Belt Slide
-
Out of stock
Our Pouch Weight Belt is a more comfortable solution for holding additional weight around the waist.
A common cause of losing a weight belt is the buckle coming loose and/or the belt slipping off, accidentally. This often occurs when divers are hauling themselves back onto a RIB or hard-boat, with no harm to the diver (except to his or her wallet). However, it can sometimes happen if the buckle gets caught or loosened, during the dive. In this situation, the consequences could be more serious.
This 'Pouch Weight Belt has been designed to minimise the possibility of that scenario. The belt is much wider, increasing the contact area and also improving comfort. The belt also has a 'rubberised' inner lining, to resist slippage. In addition, the weights are secured inside separate fixed pockets, with less chance of the individual blocks becoming snagged. All finished off with a solid stainless steel high-grip weightbelt buckle. For convenience, each pouch also contains a separate 'removable' mesh bag, so that lead shot can be used instead of standard weights.
-
Out of stock
- Newly Manufactured Lead Shot.
- No Scrap Lead Used.
- #5 Hardened, round shot
- Hardened with Antimony.
- Heavy-Duty Nylon Mesh Bags.
-
PREMIUM MARSEILLES RUBBER BELT
AED250.00PREMIUM MARSEILLES RUBBER BELT
AED250.00Rubber weight belt with Marseillaise stainless steel buckle.
Because it is made from a stretch material, the belt automatically tightens up during descent, when it generally loosens due to abdominal pressure and the reduction in the thickness of the wetsuit.
Consequently the belt always fits snugly against the diver in every phase of the dive.
The Marseillaise stainless steel buckle has a tilting check pin that fits into the holes situated at regular intervals along the belt.
Secure grip and quick emergency release.
-
MALTA RUBBER BELT
As low as AED215.00MALTA RUBBER BELT
As low as AED215.00Rubber weight belt with stainless steel buckle.
Because it is made from a stretch material, the belt automatically tightens up during descent, when it generally loosens due to abdominal pressure and the reduction in the thickness of the wetsuit.
Consequently the belt always fits snugly against the diver in every phase of the dive.
The quick-release stainless steel buckle provides instinctive and rapid emergency release.
The buckle pin passes through, is very strong and is riveted at both ends.
-
Out of stock
NYLON POCKET WEIGHT BELT
As low as AED130.00NYLON POCKET WEIGHT BELT
As low as AED130.002" width webbing
Each Pocket Holds 2kg/4.4lbs
Comes with stainless steel ring, a stainless steel buckle
Material: 840 PVC Polyester + 316 Stainless Steel -
Weight
As low as AED65.00Colorful fade resistant colors, vinyl is tough and long lasting, Blue finish resists scratching.
-
Out of stock
Weight Belt Buckle - Shark
AED43.00Weight Belt Buckle - Shark
AED43.00A durable stainless steel buckle, compatible with any 2" wide webbing material.- Heavy-duty pinned hinge design made from 316-series stainless steel
- Incorporates three slot design for weight belts and harness waist belts