Tank & Weights
-
Out of stock
Our Pouch Weight Belt is a more comfortable solution for holding additional weight around the waist.
A common cause of losing a weight belt is the buckle coming loose and/or the belt slipping off, accidentally. This often occurs when divers are hauling themselves back onto a RIB or hard-boat, with no harm to the diver (except to his or her wallet). However, it can sometimes happen if the buckle gets caught or loosened, during the dive. In this situation, the consequences could be more serious.
This 'Pouch Weight Belt has been designed to minimise the possibility of that scenario. The belt is much wider, increasing the contact area and also improving comfort. The belt also has a 'rubberised' inner lining, to resist slippage. In addition, the weights are secured inside separate fixed pockets, with less chance of the individual blocks becoming snagged. All finished off with a solid stainless steel high-grip weightbelt buckle. For convenience, each pouch also contains a separate 'removable' mesh bag, so that lead shot can be used instead of standard weights.
-
Out of stock
VALVE M25
AED195.00 -
Out of stock
-
CAM BAND TRIM WEIGHT POCKETS
AED125.00CAM BAND TRIM WEIGHT POCKETS
AED125.00The Cressi Tank Strap Weight band can help prevent excess cylinder buoyancy.
By placing hard or soft lead in the weight pocket situated on your cylinder, the cam band will keep the cylinder from floating towards the end of a dive and can provide balance to the system for a more comfortable dive.
-
Out of stock
NYLON POCKET WEIGHT BELT
As low as AED130.00NYLON POCKET WEIGHT BELT
As low as AED130.002" width webbing
Each Pocket Holds 2kg/4.4lbs
Comes with stainless steel ring, a stainless steel buckle
Material: 840 PVC Polyester + 316 Stainless Steel -
Out of stock
Silencer
AED165.00Silencer for air draining from diving tanks. Anyone who has ever had to drain residues of an old breathing mixtures know how hard it is to keep the hiss of the air to a bearable level even when draining the air relatively slowly. The silencer is attached to the tank valve and enables draining of the old air within minutes even in a room or on a boat. Thanks to an efficient lowering of the sound level the noise does not exceed the level at which it would hinder having a conversation anywhere near the tank.