Valves

9 Items results

per page
Set Descending Direction
    • Standard yoke outlet with spin-out DIN insert converts to 230 bar DIN outlet
    • 3/4”-14 NPSM standard inlet threads
    • Clean for pre-blended Nitrox up to 40% oxygen

    WishList

    Compare

  1. Nitrox Ready, using oxygen compatible materials and a lubrication free design. The valves have DIN outlets that can accept optional removable inserts (sold separately) so the valves may be used with yoke connectors. You may see this style of outlet variously described as Pro, 200-Bar DIN (G 5/8 BSP), or 232-Bar DIN. All these different names apply to exactly the same style valve outlet, which is suitable for use with the 3442 psi service pressure cylinders and any DIN style regulator or (with the addition of an optional insert) converted for any yoke style regulator. Inlets have standard 0.750-14 NPSM (3/4 NPS) neck threads for use with all modern aluminum and steel SCUBA tanks and include a threaded 'dip tube' with hex opening for easy installation. Valves have a 5250 psi burst disk.

    WishList

    Compare

  2. Nitrox Ready, using oxygen compatible materials and a lubrication free design. The valves have DIN outlets that can accept optional removable inserts (sold separately) so the valves may be used with yoke connectors. You may see this style of outlet variously described as Pro, 200-Bar DIN (G 5/8 BSP), or 232-Bar DIN. All these different names apply to exactly the same style valve outlet, which is suitable for use with the 3442 psi service pressure cylinders and any DIN style regulator or (with the addition of an optional insert) converted for any yoke style regulator. Inlets have standard 0.750-14 NPSM (3/4 NPS) neck threads for use with all modern aluminum and steel SCUBA tanks and include a threaded 'dip tube' with hex opening for easy installation. Valves have a 5250 psi burst disk.

    WishList

    Compare

  3. Dive Rite's 200 bar manifold uses two barrel o-rings to seal either end of the cross-bar, which provides better shock absorption and redundancy compared to the old-style metal-to-metal seal manifolds. Our 200 bar manifold has a 180mm isolation crossbar that fits both 7.25-inch and 8-inch diameter tanks and recessed burst disks are protected from accidental shearing. The manifold can also be converted from yoke to DIN by removing the included insert (doughnut) with a 8 mm Allen wrench. This manifold style is popular since yoke, 200 bar, or 300 bar regulators can be used with it. Shock absorbing ribbed rubber knobs are rugged, yet easy to manipulate. All Dive Rite manifolds come standard for 3500 psi service pressures. All Dive Rite manifolds and valves come with Viton o-rings and oxygen compatible lubricants and are Nitrox ready up to 40-percent.

    WishList

    Compare

  4. Can be used as a stand-alone valve or with a cross bar with an isolator valve in a doubles manifold.

    WishList

    Compare

  5. Can be used as a stand-alone valve or with a cross bar with an isolator valve in a doubles manifold.

    WishList

    Compare

9 Items results

per page
Set Descending Direction