For divers who use argon gas for drysuit inflation or carry a small bottle of spare air, our Argon Bottle Mount carries one 6-cubic foot or one 13-cubic foot tank. Designed to attach along 1-inch (2.54 cm) D-rings of the TransPac backplate or along perimeter holes of aluminum or steel backplates, the Argon Bottle Mount can be attached to either side of the backplate and behind the diver's arm. A quick release buckle allows the bottle to be removed.
As low as AED10,555.00
TOP-OF-THE-LINE FRONT ZIPPED SUIT WITH MANY NEW FEATURES
The new Waterproof D7X NYLOTECH.
Since it’s introduction the Waterproof D7 has been the prime choice of drysuit within the advanced diving community.
Even though the Waterproof D7 was a modern and extremely well performing drysuit, the R&D at Waterproof decided to give it a major overhaul. Recent development in material and enhanced polymer science has made it possible to perfect the Waterproof D7 concept.
Nylotech, a new material developed to be softer, yet more resistant to abrasion.
A reshaped and slimmer fit resulting in a less bulky drysuit.
A new longer and curved zipper, placed higher up on the shoulder to enhance upper body movement as well as providing effortless donning and doffing in an effort to boost the overall diving experience.
As low as AED310.00
If you need extra warmth around your neck on cold dives, this is your option. A very comfortable superstretch neckseal that fits WP, SI TECH Neck Tite and Quick Neck. The seal is made of Yamamoto superstretch 4000 Neoprene, in other words – top class.
As low as AED520.00
There are several solutions that support drysuits with soft socks on the market. “Rock-Boots” is the common name for the group in general. But there are few boots that also support the insulation factor. The B5 neoprene boot is a sturdy rubber reinforced soft boot with several technical finesses.
As low as AED7,295.00
Based on the world's first Ultra Light D9 Drysuit Concept from Waterproof, the D9X Extended Breathable Drysuit features some technical improvements. As a leisure diver, you can always decide NOT to dive if environmental or weather issues are of concern or if you don't want to abuse or risk your equipment. But for some divers this is not always a choice. To meet their need for equipment that has extra reinforcement, Waterproof R&D redesigned the standard D9 suit and found a way to strengthen some areas without jeopardizing the most important feature of the suit: the Ultra-Light Concept.
As low as AED7,795.00
The EX2 has its origin in our military line of breathable drysuits made for the Special Forces where movability, breathability and low weight is essential. The EX2 delivers that to the MAX! This suit is a special tool made for a special purpose. It is made with maximum comfort in mind, erasing the line between what you do above and below the water. As with any special tool there are NO compromises, at least not when it comes to its main purpose. If you need a traditional diving suit, a suit that can take anything you throw at it, buy one of our tough butyl based suits instead. The EX2 is slightly more fragile, slightly more sensitive and can't take quite as much wear and tear. If you can accept this, the suit will serve you well. The EX2 doesn't compromise on comfort and flexibility!
As low as AED7,050.00
Waterproof presents a new lighter version of the D7 PRO ISS FrontZip to cater to those divers who want a lighter suit for travelling or for more leisurely diving tasks. The material is a RipStop nylon-based trilaminate, with 100 gr butyl coating. The new TIZIP dryzipper contributes to lightness and softness. This together with the new Xlite FlexBoot makes the D6 LITE suit smoother and lighter, easier to fold and provides a far more relaxed feeling when in use than any other suit in the category.
The "Perfect Drysuit" does it exist? It took Waterproof three years of problem analysis, material sourcing and intense testing to find the answer to the perfect drysuit, the patented D1 Hybrid. The first existing Insulated Constant Volume Drysuit. D1 features Silicone Seals and a genius fixed inner 3D Mesh lining. The two outer layers are kept apart by nylon springs, like in a bed mattress.