Analysers
-
Out of stock
Standard Flow Limiter
AED450.00The standard flow limiter works on the principle of a needle valve. Its flow is therefore dependent on the pressure in the tank. The valve can be manually regulated.
-
Out of stock
A connection house for use with the professional, standard, or inflator flow limiter. It is meant for a cylindrical low-pressure connection with a diameter of 5.8 mm.
-
FLOWMETER FOR DIVESOFT ANALYSER
AED70.00FLOWMETER FOR DIVESOFT ANALYSER
AED70.00Simple flowmeter for checking of the flowing air from a professional or standard limiter. It can also be used for calibration of a standard flow limiter.
-
Out of stock
Flowmeter in a set with a connection hose. Simple flowmeter for checking of the flowing air from a professional or standard limiter. It can also be used for calibration of a standard flow limiter.
-
Out of stock
PROFESSIONAL FLOW LIMITER
AED600.00PROFESSIONAL FLOW LIMITER
AED600.00The professional flow limiter is equipped with a reduction valve, which enables removal of gas from the analyzed cylinder at a constant flow, independent of the tank pressure. It enables the sampling of gas even from tanks with very low pressure. It is useful mainly for the analysis of the residual gas before the mixing of a new mixture.
The connection hose has to be ordered separately.
-
Out of stock
AST-17D Oxygen Sensor
AED310.00The AST-17D works with the Hollis Explorer MK1 and the VR Sentinel rebreathers. It also works with the following oxygen analyzers: OxyCheq Expedition-X, OxyCheq ECII, Dive Rite VTI, Spectrum, MiniOx 1 and VN202.
-
Out of stock
AST-40D
AED335.00OxyCheq is now making replacement oxygen sensor orders for the Analox O2EII oxygen analyzer.
-
Expedition Flow Restrictor with nozzle connects to any sensor with standard threads.The restrictor features a standard quick disconnect to connect to low pressure inflator hose.
Reduces flow down to between 2 to 4 LPM. -
Expedition BC Flow Restrictor
AED120.00Expedition BC Flow Restrictor
AED120.00Expedition Flow Restrictor connects to the nozzle on any of the Expedition series analyzers.The flow restrictor features a standard quick disconnect to connect to low pressure inflator hoses.
Reduces flow to between 2 to 4 LPM.